Yeastar Linkus Mobile Client 5.3.13

version 5.3.13

1. Added support for 1:1 video call.
2. Added compatibility with video preview of intercom calls.
3. Optimized Codec to improve call quality.
- Added Opus codec.
- Changed the default codec from iLBC to G729.
4. Adjusted compatible version to Android 6.0 or later.
5. Optimized user experience in External Chat.
6. Optimized user experience in Linkus calls.
7. Fixed the issue that failed to make outbound calls.

version 4.13.18

Fixed the issue that Linkus would crash unexpectedly.

version 4.13.16

1. Added support for Android 13 adaptation.
2. Added support for External Chat feature, which allows you to centrally deal with customer queries (from different messaging channels, such as SMS or social media) on Linkus Mobile Client.
3. Optimized user interface to improve user experience.

version 4.12.5

Fixed the issue that failed to perform attended transfer.

version 4.12.3

Fixed the issue of call volume: The call volume was excessively low and adjusting the volume did NOT take effect.

version 4.12.2

-Added compatibility with the Boss-Secretary feature. On Call Logs, boss extensions can check the logs of calls that are automatically forwarded to the secretary extension, which are displayed as missed calls and labeled with a “Secretary” icon. 【P-Series】
Note: This feature is only available for extensions that are set as “Boss Extension” by the administrator.

version 4.11.6

1.Added compatibility with Two-factor Authentication (2FA) feature. With 2FA enabled, you need to enter your extension password and an additional authentication code when logging in to your account. 【P-Series】
2.Fixed the issue that failed to answer calls on Linkus.【All】

version 4.10.6

1.Added support for agent pause reason: Queue agents can switch status to pause with a reason by dedicated button or feature code. ——Affected PBX: P-Series PBX System
2.Fixed the issue that failed to download voicemail messages and call recordings. -- Affected PBX：P-Series Cloud Edition
3.Fixed the call issue: Failed to make outbound calls with a prefix containing “*”.
4.Improved Linkus stability: Fixed the issue that Linkus would crash unexpectedly.

version 4.8.6

1.Authorized users can start, pause, or resume the call recording at any time during a call. (P-Series PBX System)
2.Added compatibility with Organization Management, which allows users to find colleagues by department under Extension to quickly initiate communication. (P-Series PBX System)
3.Added support for Restrict External IP. With Restrict External IP enabled, the system will reject incoming calls from IPs that are neither LCS-registered nor LAN IPs (Path: Me→Settings→Advanced ).

version 4.7.6

1.Added compatibility with large capacity Yeastar P-Series Software Edition.【P-Series Software Edition】
2.Moved “Codec” and “ICE” to Me→Settings→Audio Options. 【All Yeastar PBXs】
3.Optimized user interface to improve user experience. 【All Yeastar PBXs】

version 4.6.8

1. Added support for Portuguese interface.【All Yeastar PBXs】
2. Fixed the issue that NFC feature was not supported under Russian interface.【P-Series PBX System】
3. Fixed the call issue: After enabling SRTP feature for an extension, the extension user failed to make calls.【P-Series PBX System】
4. Fixed the push notification issue of Linkus calls: After users dialed a feature code to switch extension presence, the users could not receive notifications on incoming calls.【P-Series PBX System】

version 4.5.11

Improved Linkus stability.

version 4.5.10

Fixed the issue that failed to make a call using IPv6.【All Yeastar PBXs】

version 4.5.6

1、Added support for resetting login password by email address.【P-Series IPPBX】
2、Added support for multiple accounts, which allow you to switch between accounts without having to log out and log back in (Path: Me> Settings> Account Management).【All Yeastar PBXs】
3、Optimized audio experience in busy tone.【All Yeastar PBXs】

version 4.4.13

Added compatibility with Yeastar P-Series Cloud Edition, which transforms your mobile phone into a fully-featured office extension, provides convenient call experience, and offers powerful collaboration features.

version 4.4.10

1. Added compatibility with Voicemail Transcription feature, which allows users to read voicemails in text format. 【P-Series IPPBX】
Note: PBX requirement:
. P-Series Appliance Edition: 37.5.0.9 or later.
. P-Series Software Edition: 83.5.0.9 or later.
2. Added Ringtone option: Users can set a specific ringtone for Linkus to distinguish Linkus calls from system calls (Path: Settings> Audio Options> Ringtone).【All Yeastar PBXs】
Note: The available ringtones are synchronized from your phone.

version 4.3.11

1. Added compatibility with Phonebooks feature, which allows users to view company contacts by phonebooks.【P-Series IPPBX】
Note:
. PBX requirement: Version 37.4.0.16 or later.
2. Added support for Interactive Connectivity Establishment (ICE) feature, which helps improve call quality. 【P-Series IPPBX】
Note:
. PBX requirement: 37.4.0.16 or later. Subscribed Enterprise Plan or Ultimate Plan.
. Linkus requirement: Logged in via Serial Number (SN) or Fully Qualified Domain Name (FQDN).

version 4.2.7

1. Added support for Chat feature.【P-Series IPPBX】
Note: PBX Server requirement: Version 37.3.0.40 or later.
2. Optimized Outbound Prefix feature: Added support for adding + as the prefix number. 【All Yeastar PBXs】
3. Optimized Dial Pad Tones setting: Added support for following system settings. 【All Yeastar PBXs】
4. Fixed the issue of Linkus calls: When a new call arrived during a call, Linkus automatically picked up the new call after the caller of previous call hung up. 【All Yeastar PBXs】

version 4.1.7

1. Added support for deleting one-touch recording files. 【S-Series IPPBX & Cloud PBX】
2. Added support for the following codecs: u-law, a-law, iLBC, G722, and G729. 【P-Series IPPBX】
3. Added compatibility with All Busy Mode for Endpoints.【P-Series IPPBX】
4. Added compatibility with group voicemail feature: You can share the workload of reading and responding to voicemail messages within your team. 【P-Series IPPBX】
5. Fixed the issue that the volume of phone receiver was too low during a call.

version 3.7.5

Added support for the following codecs: u-law, a-law, iLBC, G722, and G729. If you suffer from bad call quality, try to solve it by adjusting codec (Path: Me> Settings> Advanced> Codec).
Note:
-A codec works only when it is enabled on both Linkus and PBX server.
-PBX server must meet the following version requirements:
S-Series VoIP PBX: 30.14.0.97 or later.
K2 IPPBX: 80.14.0.97 or later.
Cloud PBX: 81.14.0.97 or later.

version 3.6.9

All Yeastar PBXs：
Fixed the issue that duplicated extension numbers caused the destination error of When Busy.

P-Series IPPBX：
1. Added support for automatically switching extension presence based on Business Hours and Holidays.
2. Added Linkus Web Client in Ring Strategy.
3. Added support for Contacts feature.

version 3.5.3

1. Optimized problem-reporting feature: When reporting a problem, users must describe the problem in detail.
Note: 10-500 characters are required.
2. Fixed the issue that bluetooth would disconnect during a call.
3. Fixed the issue of repeated calls: If you double tapped a call log, Linkus would make two calls and generate two call logs.
4. Adjusted compatible version: Android 5.0 or later.

version 3.4.18

1. Added compatibility with Yeastar P-Series PBX System.
2. Added support for using NFC to change the IP address of Yeastar P-Series PBX System.
For more information, see Change the IP Address of the PBX.
3. Added support for Slovak interface.
4. Fixed the issue of call delay and inconsistent call logs.

version 3.3.21

Improved user experience.

version 3.3.20

Improved the Linkus stability.

version 3.3.8

1. Added support for Czech interface.
2. Added support for Spanish interface.
3. Added support for multi-party calls: Users can have an ad-hoc conference call with 2 or more participants; every user can invite up to 3 participants to join the call.
4. Added support for deleting all logs.

version 3.1.8

1. Added compatibility with Dark Mode: With Dark Theme enabled on Android system, Linkus can run in dark mode.
Android 10 or later: Support Dark Mode.
Android 9 or earlier: Only few Android models support Dark Mode.
2. Added support for copying phone number on Call History Details page.
3. Added support for Hungarian interface.
4. Added support for Traditional Chinese interface.
5. Fixed the issue that the phone didn't ring when receiving an incoming call from Linkus.

version 3.0.9

Added support for Car Bluetooth switch: When enabled, if the car bluetooth is connected to Linkus, you can answer or hang up incoming calls on the car screen.
Note: Go to Me> Settings> Advanced Options> Car Bluetooth to enable this feature.

version 3.0.6

1. Added support for adjusting the volume of the audio received and transmitted (Path: Me> Settings > Audio Options > Audio Gain Control).
2. Added support for Greek interface.
3. Added support for Turkish interface.
4. Optimized user experience in Contacts and Call History.
5. Added support for compatibility with bluetooth car kits.
6. Fix the page lag issue.

version 2.9.6

Added support for Contacts feature: Contacts allows you to access contacts outside your organization, including personally managed contacts and shared company contacts.

Note: The Contacts feature requires support from server. The server version must meet the following requirements:
S-Series VoIP PBX: 30.13.0.15 or later.
Cloud PBX: 81.13.0.15 or later.
K2 IPPBX: 80.13.0.15 or later.

version 2.8.12

1. Optimized Conference.
2. Fixed the issue of pop-up notification: Incoming calls from Linkus could not pop up on Android 10.
3. Optimized Call Pickup feature: Optimized Call Pickup feature: The original caller's number will be displayed on Linkus when you pick up the call on Linkus.
4. Optimized Contacts page: If users refuse Linkus to access to phone contacts, and select Never ask again after denying permission, the pop-up window will not display any more.

version 2.7.12

1. Added support for searching contacts from both extensions and mobile phone contacts.
2. Optimized the Search Result on Dialpad interface
3. Optimized Paging/Intercom feature
4. Optimized the following user interfaces design:
> Search interfaces: Call Transfer, Recordings, Conference, and Contacts.
> Display interfaces: Dialpad interface of ongoing calls, Search Result on Dialpad interface, search interface of Conference contacts, and Contacts.

version 2.6.7

1. Added pop-up window for Linkus update.
2. Added support for copying and pasting phone number onto Dialpad interface to quickly place a call.

version 1.5.11

1. Added support for MiPush, Huawei Push, and JPush.
2. Added Background Mode setting.
3. Optimized number rewriting feature: users can directly rewrite the contact’s number on Linkus, then dial the customized number.
4. Fixed the Linkus dial pad issue: searching contacts by name could not work when users were trying to add a conference member.
5. Fixed the Linkus dial pad issue: there was no keypad tone when dialing number during conference or making a second-dial.

version N/A